Application / Suitable
| Awesome for 3D Airplane, Jet & 1/5 & 1/6th Monster / Crawler / Truck / Off-road Car. |
Electrical Specification (Function Of The Performance)
| Torque At 6.0V | 56.2 kg-cm / 780.6 oz-in |
| Torque At 7.4V | 66.7 kg-cm / 926.5 oz-in |
| Torque At 8.4V | 73.2 kg-cm / 1016.7 oz-in |
| Speed At 6.0V | 0.12 sec / 60° |
| Speed At 7.4V | 0.10 sec / 60° |
| Speed At 8.4V | 0.08 sec / 60° |
Protection Mechanism
| Soft Start Protection | Soft start to a neutral position. |
| Over Voltage Protection | Over 9.0V drive the protection mode and 8.4V return to normal mode. |
| Low Voltage Protection | Lower than 4.0V, drive the protection mode and 4.5V return to normal mode. |
| Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
| Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
| Lose Control Protection | When losing the transmitter signal, that servo will be back to the neutral position immediately and lock. |
Power Supply
| Operating Voltage Range | 4.5V ~ 8.7V ( 4 ~ 6 Cell Ni-MH or 2S HV Li-Poly / 2S Li-Fe) |
Control Specification
| Control System | 32-bits CPU Digital Calculator / AD 12-Bits Resolution ( 4096 Steps ) Frequency：Up to 333Hz / Neutral：1500us or 1520us |
| Dead Band Width | 0.001ms ( Default：1us) |
Mechanical Specifications
| Ball Bearing | Dual, Stronger Ball Bearings |
| Gear | All Stainless Steel Helical Gears |
| Outside Case | Full One-Piece Aluminum CNC Casing |
| Motor | Custom High-Efficiency Brushless Motor |
| Horn / Gear Spline | 25 Teeth ( Same as F-Type ) |
Physical Specifications
| Dimension (mm) | 40.5 x 21 x 42.9 mm / 1.59 x 0.83 x 1.69 in |
| Weight (gram) | 92.0 ± 1 grams / 3.24 oz |
| Product Picture / Dimension Sketch |  |
Patent
| M 502116 |