| Watt-out-put limit: The output is rated at 388 watts. Under this watt, the speed control will work normally. When the watt approximately reaches to 410~420, it will automatically shut down to prevent the overload to the speed control. Temperature protection: When the temperature reaches to 95 degrees C, the speed control will slow down and the output will reduce 50% (the on-board LED will turn on). You have to move the throttle stick to the idle position, and then the speed control will rework once you throttle up again. |
Feature
| Smooth forward operation Extremely low resistance 32KHz Frequency operation P.O.R. Power on reset Easy user programmable features. Audible arming signal microprocessor controlled B.E.C: 5.0V / 3.0A Programmable low-voltage cut-off for Li-Po Safe start protection micro size allows for ease of installation Programmable motor rotation |
Specifications
| Item Size | 70 x 29 x 16 mm |
| Item Weight | 50.5 g |
| Max Continuous Current | 70 Amps with heat sink |
| Operating Voltage Range | 2S~5S Lithium, 6~19 Cell Ni |
| On Resistance | 1.28 mOHM |
| Max BEC Output | 3 Amps @ 5.0V |
Warning
| DO NOT install a motor whose rating is larger than the speed control’s limit to avoid damage or burn down. |